Blink Video Doorbell Mount for Vinyl, Hardi board, Aluminum, Cedar [Choose Siding] [5 colors]

Fits Blink Video on any Standard style siding. (Cedar/Aluminum/hardiboard/vinyl)* Also Fits blink 3 hole revision 2 center hole is optional.. This item Does NOT fit Ring doorbell. For Ring 2 Ring Original or Ring Pro see different listing.

Colored shim to fix the angled doorbell problem where your doorbell when screwed to angled siding this will make the doorbell face straight ahead instead of slanted upwards.  Choose your siding then Choose a color that’s close to your siding color, black or silver to match the back of Doorbell, or match the cover.

This mount is for the Blink doorbell itself and does not fit the wider hollow flimsy optional Blink Corner/Angled shim that has different mounting holes. Instead of sacrificing quality of my mount to accommodate this......I NOW OFFER optional 20° LEFT or RIGHT built into the 4" mount.
If you need any angle up to 45degrees I can make one built into your mount.  Contact me before ordering.

Note: When installing the Blink on the backing plate you have to push it really hard for it to click in. This is due to Blink manufacture specifications and not NearlyNewModels. My mounts have stability legs and give you some support when pushing to snap the doorbell into backing plate. 

See my Brand new installation video on youtube for the Blink!
https://youtu.be/3Kp9o0h-6X4

*Does NOT fit on Dutch Lap style siding (Dutchlap siding has a flat front that proceeds into an angled top that slants backwards towards the house. ) For dutch lap vinyl siding please contact me for custom order as every Dutchlap siding panel is different and these have to be made to fit your siding dimensions. 

Measuring your Siding: https://www.doorbellmounts.com/pages/measuring-your-siding

To Order: Choose Your siding from the "Siding Type" dropdown first. If your siding size is not listed in the dropdown please contact me. Choose your color from the "Color" dropdown last. *If unsure which siding you have please send me a picture in messages and i will assist.

To Install:

See my Brand new installation video on YouTube for the Blink!
https://youtu.be/3Kp9o0h-6X4

Siding Options Explained:

Standard vinyl siding means that the siding has a single sloped front with exactly 1/2" projection for best fitment of this mount. If you do not have .5" projection email me for a quote to fit your siding. Mount will have a slight curve/dish to fit the contour of your standard siding.

Board/Metal mount fits Vinyl Shake siding, Hardi board, Cement board, Cedar, Aluminum or any flat but slanted front siding. it does not have a curve and is designed for projection 3/8-7/16

5"+ Vinyl Shake and Board/ Metal FLAT WEDGE Option (not common) [NEW ITEM]
This is for Vinyl Shake siding, Hardi board, Cement board, Cedar, Aluminum or any flat but slanted front siding. if your Vinyl has a dish inwards this wont fit right.
Usually comes in single 1 slat per board. This is the version you want if you want a 5-7% vertical shim or vertical wedge like what ring provides with the ring 2 and ring pro to angle your existing camera up or down.
This item is for Panels that measure 5inches or greater than 5" (projection does not matter as this is a wedge). This has no standoff leg and is similar to the wedge that comes with the ring 2 but is angled 7degrees instead of 5degrees and is solid so no water or bugs can get behind it and gives you a much stronger mounting surface.
This is the version you want if you have a large siding panel this allows you to mount doorbell anywhere on the panel. Perfect for if you want you doorbell higher, lower or centered on the panel. It still has the Siding angle built in so doorbell faces straight ahead.
This is also the version you want if you have flat siding (brick, stucco, etc) and want to angle your doorbell up or down 7degrees
This is also the version you want if you have angled siding such as vinyl siding but your doorbell is too low and you want it angled up more. this will angle the doorbell up addition 7 degrees on angled siding.
This item is not pictured)

 1 3/4 Brick molding Riser Block Spacer
The 1 3/4" riser block spaces your doorbell out away from siding to allow better view if something is blocking the camera or to allow for more room for wiring. The 1 3/4 inches is perfect for allowing the doorbell when mounted on door trim to see past a brick wall that blocks the cameras peripheral vision. this item spaces the camera out so it can see past brick.

4" Vinyl Siding Mount 20° LEFT/RIGHT
Blink 4" vinyl siding 1/2 projection mount 20 degrees left or right  all in one mount that is solid color and all in one 

The direction of the angle is not based off what the doorbell sees or the doorbell camera app on your phone. The direction of the angle is based off your Point of view when standing  looking directly at the wall where the doorbell will be mounted. When looking directly at the wall where the doorbell will be mounted does  the doorbell Need to point to your left or your right?""  If LEFT get LEFT angled version. If RIGHT get the RIGHT angled one.  If you  are still unsure whether you need a Left or Right contact me first as this is made to order.

Other degree angles besides 20 and siding sizes can be custom made.

Printed in a material called PETG. This material resists UV LIGHT and resists all sorts of chemicals. Recyclable. And most importantly resists cold temperatures as well as up to 200 degrees Fahrenheit.

Now ships with printed installation instruction sheet.
Comes with two longer screws. All mounting hardware you need is included. Blink Doorbell not included.